Um die Webseite optimal gestalten und Ihnen an Ihre Interessen angepasste, nutzungsbasierte Informationen zukommen lassen zu können, verwendet Daimler Cookies. Mit der Nutzung der Webseite stimmen Sie der Verwendung von Cookies zu. > Weitere Informationen erhalten Sie in den Cookie-Hinweisen.

Accept
  • smart forfour
  • EQ forfour
  • 04/2021
X

Print
Opening and closing the service flap
WARNING Risk of accident due to driving with the service flap unlocked

The service flap may come loose and block your view or endanger other road users.

Before every trip, ensure that the service flap is locked.
WARNING Risk of injury from using the windscreen wipers when the service flap is open

If the windscreen wipers start moving when the service flap is open, you could be trapped by the wiper linkage.

Always switch off the windscreen wipers and vehicle before opening the service flap.
Requirements:
  • In the vehicle, the operating fluid reservoirs are located under the service flap at the front.

  • Observe all safety regulations when working on the vehicle. Always have work in the engine compartment carried out at a qualified specialist workshop.

Carefully remove snow and dirt from the ventilation slots above the service flap so that air intake is ensured at all times.

  • Secure the vehicle against rolling away.

  • In vehicles with a lockable service flap, unlock this prior to opening.

Unlocking the service flap
Insert the tip of the key in the opening in lock cover .
To lift the lock cover, push the key to the right .
Remove the lock cover.
Insert the key in the lock and turn it clockwise by 90°.
Opening the service flap
Pull both levers in the direction of the arrow.
Lift service flap at the front.
Pull service flap forwards slightly and lift it upwards.
Carefully rest service flap that is attached to the straps against the front end.
Closing the service flap
Lift service flap and place it on markings .
Push service flap back forcefully.
Push both levers as far towards the rear as possible.

Check that the service flap has been closed correctly and that there are no small objects (e.g. small stones) in the locking mechanisms.

Locking the service flap
Insert the key in the lock and turn it to position .
Insert and engage lock cover on the driver's side.