The following function is country-dependent and only available in conjunction with the Driving Assistance Package.
Active Steering Assist is only available up to a speed of 210 km/h. The system helps you to stay in the centre of the lane by means of moderate steering interventions. Depending on the speed driven, Active Steering Assist uses the vehicles ahead and lane markings as a reference.
Depending on the country, in the lower speed range Active Steering Assist can use the surrounding traffic as a reference. If necessary, Active Steering Assist can then also provide assistance with a driving style outside the centre of the lane.
When the system is actively steering, the 
symbol is shown in green in the multifunction display.
If the detection of lane markings and vehicles ahead is impaired, Active Steering Assist switches to passive mode. The system provides no support in this case. During the transition from active to passive status, the symbol is shown as enlarged and flashing. Once the system is passive, the symbol is shown as grey in the multifunction display.
The driver is required to keep their hands on the steering wheel at all times and be able to intervene at any time to correct the course of the vehicle and keep it in lane. The driver must expect a change from active to passive mode or vice versa at any time.
If the driver has not steered the vehicle for a considerable period of time or has removed their hands from the steering wheel, an optical warning is given first. Display 
appears in the multifunction display. If the driver still does not steer the vehicle, or gives no confirmation to the system, a warning tone sounds in addition to the visual warning message.
The driver steers the vehicle.
The driver presses a steering wheel button or operates Touch Control.
If Active Steering Assist detects that a system limit has been reached, a visual and acoustic warning is issued.
Active Steering Assist is only an aid. The driver is responsible for the distance to the vehicle in front, for vehicle speed, for braking in good time and for staying in lane. Before changing lanes, the driver must make sure that the neighbouring lane is free (glance over the shoulder).
Active Steering Assist has a limited steering torque for lateral guidance. In some cases, the steering intervention is not sufficient to keep the vehicle in the lane or to drive through exits.
There is poor visibility, e.g. due to snow, rain, fog, heavy spray, greatly varying light conditions or strong shadows on the carriageway.
There is glare, e.g. from oncoming traffic, direct sunlight or reflections.
Insufficient road illumination.
The windscreen is dirty, misted up, damaged or covered in the vicinity of the camera, e.g. by a sticker.
No, or several, unclear lane markings are present for one lane, or the markings change quickly, e.g. in a construction area or junctions.
The lane markings are worn away, dark or covered up, e.g. by dirt or snow.
The distance to the vehicle in front is too small and the lane markings thus cannot be detected.
The road is narrow and winding.
There are obstacles on the lane or projecting out into the lane, such as object markers.
On tight bends and when turning.
When crossing junctions.
At roundabouts or toll stations.
When towing a trailer.
When actively changing lane without switching on the turn signal indicator.
When the tyre pressure is too low.
Depending on the selected vehicle settings, Active Steering Assist may be unavailable. Observe the status display of Active Steering Assist in the multifunction display More.
If the system limitations of Active Steering Assist are reached there is no guarantee that the system will remain active or will keep the vehicle in lane.
A malfunction in the detection of lane markings and objects can occur.
This could cause unexpected steering intervention.
You can watch an animation on this topic at the following link:
