Mercedes-Benz

Settings menu

Press the

button to call up the list of menus.

Use the

button to select the Settings menu.

Press the

button to confirm.

You have the following options on the Settings menu:

Changing the settings for the driver assistance systems on the Assistance submenu
Changing the settings for the exterior lighting on the Lights submenu
Changing the display options on the Instrument cluster submenu
Setting the permanent limiter on the Vehicle submenu
Resetting the settings to factory settings

Select the desired submenu and confirm your selection.

Assistance submenu

Select a driving or driver assistance system and configure a setting.

Switching ESP® on/off More More.

Switching Traffic Sign Assist on/off More.

Switching Active Brake Assist on/off More.

Switching Blind Spot Assist on/off More.

Adjusting ATTENTION ASSIST More.

Adjusting Lane Keeping Assist More.

Lights submenu

The following settings are possible on the Lights submenu:

Switching the Intelligent Light System on/off More
Switching between low beam for right- and left-side traffic (in vehicles with Intelligent Light System only)

Use the

button to select the Lights submenu.

Press the

button to confirm.

To switch between low beam for right- and left-side traffic:

use the

button to select Dipped beams Setting for.

The display will show the selected setting.

Change the selected setting with the

button.

When you change the setting, the switchover will not take place until the next time the vehicle is stationary.

When you switch over the low beam for right- or left-side traffic, motorway mode and the enhanced fog light function may not be available. This deactivation will take place only if the setting for driving on the right or left is the opposite to your vehicle's national version.

You can have the low beam set for right- or left-side traffic at a qualified specialist workshop as well.

Instrument cluster submenu

Use the

button to select the Instrument cluster submenu.

Press the

button to confirm.

To select the unit of measurement for distance:

use the

button to select the Display unit Speed-/odometer function.

The display will show the selected setting km or Miles.

Change the selected setting with the

button.

To switch the additional speedometer on/off:

use the

button to select Addit. speedo.

The current selection will appear.

Press the

button to change the setting.

Vehicle submenu

Use the

button to select the Vehicle submenu.

Press the

button to confirm.

To set the permanent limiter:

use the

button to select Limit speed (winter tyres).

The display will show the current setting.

To change the setting:

press the

button.

To save the entry:

press the

button.

You can find further information in "Permanent limiter" More.

To reset to factory settings:

use the

button to select the Factory settings submenu.

Press the

button to confirm.

The Reset all settings? function will be displayed.

Use the

button to select No or Yes.

Press the

button to confirm.

If you selected Yes previously, the display will show a confirmation message.

For safety reasons, not all functions will be reset. The Limit speed (winter tyres) function for the permanent limiter can be adjusted only on the Vehicle submenu.