Replacing the rear window wiper blade
WARNING Risk of becoming trapped if the windscreen wipers are switched on while wiper blades are being replaced
If the windscreen wipers begin to move while you are changing the wiper blades, you can be trapped by the wiper arm.
Always switch off the windscreen wipers and ignition before changing the wiper blades.
NOTE Damage to the rear window
If the wiper arm without a wiper blade falls onto the rear window, the rear window may be damaged.
Hold the wiper arm firmly in place when changing the wiper blade, or place it carefully on the rear window.
Removing the wiper blade
Switch off the ignition More.
Within approximately 15 seconds, turn the combination switch to position 
More.
More. The wiper arm moves into the change position.
Fold wiper arm 
away from the rear window and hold it tightly.
away from the rear window and hold it tightly. Press both release clips 
.
. Fold wiper blade 
in the direction of arrow 
away from wiper arm .
in the direction of arrow away from wiper arm . Remove wiper blade in the direction of arrow 
.
in the direction of arrow . Fitting the wiper blade
Position wiper blade with recess 
on lug .
with recess on lug . Fold wiper blade in the direction of arrow onto the wiper arm until the retaining clips engage in bracket .
in the direction of arrow onto the wiper arm until the retaining clips engage in bracket . Make sure the wiper blade is sitting correctly.
is sitting correctly. Fold the wiper arm back onto the rear window.