Fuse box in the engine compartment
Requirements:
Observe the notes on electrical fuses More.
Have the following readily available:
A dry cloth
A screwdriver
Opening
WARNING Risk of injury from using the windscreen wipers while the engine bonnet is open
When the engine bonnet is open, and the windscreen wipers are set in motion, you can be trapped by the wiper linkage.
Always switch off the windscreen wipers and ignition before opening the engine bonnet.
Turn clip 
on cover 
a quarter-turn to the left.
on cover a quarter-turn to the left. Pull cover upwards in the direction of the arrow.
upwards in the direction of the arrow. 
Remove any existing moisture from the fuse box using a dry cloth.
Loosen screws 
, remove fuse box lid 
from the top.
, remove fuse box lid from the top. Closing
Check whether the seal is positioned correctly in the lid.
Insert lid into the bracket at the rear of the fuse box.
Fold down lid of the fuse box and tighten screws .
. Insert cover on both sides and engage safety clips .
on both sides and engage safety clips . Close the engine bonnet.