Um die Webseite optimal gestalten und Ihnen an Ihre Interessen angepasste, nutzungsbasierte Informationen zukommen lassen zu können, verwendet Daimler Cookies. Mit der Nutzung der Webseite stimmen Sie der Verwendung von Cookies zu. > Weitere Informationen erhalten Sie in den Cookie-Hinweisen.

Um die Webseite optimal gestalten und Ihnen an Ihre Interessen angepasste, nutzungsbasierte Informationen zukommen lassen zu können, verwendet Daimler Cookies. Mit der Nutzung der Webseite stimmen Sie der Verwendung von Cookies zu. > Weitere Informationen erhalten Sie in den Cookie-Hinweisen.

Accept
  • E-Class
  • Estate
  • 04/2017 - 11/2017
app store google play
X

Print
Raising the vehicle when changing a wheel
Requirements:

  • There are no persons in the vehicle.

  • The vehicle is prepared for a wheel change More.

  • The hub caps have been removed More.

Important notes on using the jack:

  • Only use the vehicle-specific jack that has been tested and approved by Mercedes-Benz to raise the vehicle.

  • The jack is only designed for raising and holding the vehicle for a short time while a wheel is being changed and not for maintenance work under the vehicle.

  • The jack must be placed on a firm, flat and non-slip surface. If necessary, use a large, load-bearing, non-slip underlay.

  • The base of the jack must be positioned vertically under the jack support point.

Rules of conduct when the vehicle is raised:

  • Never place your hands or feet under the vehicle.

  • Do not lie under the vehicle.

  • Do not start the engine and do not release the electric parking brake.

  • Do not open or close any doors or the tailgate.

Using the wheel spanner, loosen the wheel bolts on the wheel you wish to change by about one full turn. Do not unscrew the screws completely.
Position of jack support points
WARNING Risk of injury from incorrect positioning of the jack

If you do not position the jack correctly at the appropriate jacking point of the vehicle, the jack could tip with the vehicle raised.

Only position the jack at the appropriate jacking point of the vehicle. The base of the jack must be positioned vertically under the jacking point of the vehicle.
NOTE Vehicle damage from the jack

If you do not position the jack correctly at the appropriate jack support point of the vehicle, the jack could tip over with the vehicle raised.

The jack is designed exclusively for jacking up the vehicle at the jack support points.
Take the ratchet ring spanner out of the tyre-change tool kit and place it on the hexagon nut of the jack so that the letters AUF are visible.
Position jack at jack support point .
Turn ratchet ring spanner clockwise until jack sits completely on jack support point and the base of the jack lies evenly on the ground.
Continue to turn ratchet ring spanner until the tyre is raised a maximum of 3 cm off the ground.
Loosen and remove the wheel More.
Related topic