the airbag has been deployed.
the vehicle is heavily braked from a speed of more than 70 km/h to a standstill.
When you pull away again, the hazard warning light system will switch off automatically at approximately 10 km/h. You can also switch off the hazard warning light system using the warning lamp button.
The safety vests are located in stowage spaces in the front door.
Safety vests can also be stored in the rear door stowage spaces.
the safety vest is the correct size
the safety vest is fully closed whilst being worn
the reflective strips are damaged or dirt on the reflective strips can no longer be removed
the maximum number of washes is exceeded
the fluorescence has faded
First-aid kit (soft sided) is located on the right-hand side of the boot and is secured with Velcro strip .
QR codes are attached in the fuel filler flap and on the opposite side on the B-pillar. In the event of an accident, rescue services can use the QR code to quickly find the appropriate rescue card for your vehicle. The current rescue card contains the most important information about your vehicle in a compact form, e.g. the routing of the electric lines.
Further information can be obtained at Mercedes-Benz homepage - rescue card.
When starting assistance has finished:
Further information can be obtained at a qualified specialist workshop.
When the charging process is complete:
If you manipulate or bridge a faulty fuse or if you replace it with a fuse with a higher amperage, the electric line could be overloaded.
This could result in a fire.
Electrical components or systems may be damaged by incorrect fuses, or their functionality may be significantly impaired.
Blown fuses must be replaced with fuses of the same rating, which you can recognise by the colour and fuse rating. The fuse ratings and further information to be observed can be found in the fuse assignment diagram.
Fuse assignment diagram: in the vehicle document wallet.
Moisture may cause damage to the electrical system or cause it to malfunction.
If the newly inserted fuse also blows, have the cause traced and rectified at a qualified specialist workshop.
The vehicle is secured against rolling away.
All electrical consumers are switched off.
The ignition is switched off.
A flat tyre severely affects the driving characteristics as well as the steering and braking of the vehicle.
Tyres without run-flat characteristics:
Tyres with run-flat characteristics:
Vehicles with MOExtended tyres: it is possible to continue the journey for a short period of time. Make sure you observe the notes on MOExtended tyres (run-flat tyres) More.
Vehicles with a TIREFIT kit: you can repair the tyre so that it is possible to continue the journey for a short period of time. To do this, use the TIREFIT kit More.
Vehicles with Mercedes me connect: you can make a call for breakdown assistance via the overhead control panel in the case of a breakdown More.
All vehicles: change the wheel More.
Apart from some country-specific variants, vehicles are not equipped with a tyre-change tool kit. For more information on which tyre-changing tools are required and approved for performing a wheel change on your vehicle, consult a qualified specialist workshop.
Jack
Chock
Wheel wrench
The jack weighs approximately 3.4 kg.
The maximum load capacity of the jack can be found on the sticker affixed to the jack.
The jack is maintenance-free. If there is a malfunction, please contact a qualified specialist workshop.
The tyre-change tool kit is located in tool bag on the boot floor.
Jack
Gloves
Wheel wrench
Centring pin
Folding chock
Ratchet for jack
Depending on the vehicle's equipment, the storage bag for the TIREFIT kit is located in the luggage compartment or on the left side of the stowage net. Comply with the loading guidelines More.
LK2 – 12 V/15 A, 180 W, 0.8 kg
Emissions sound pressure level LPA 83 dB (A)
Sound power level LWA 91 dB (A)
The tyre inflation compressor is maintenance-free. If there is a malfunction, please contact a qualified specialist workshop.
the engine cannot be started
the electric parking brake cannot be released or applied
the automatic transmission cannot be shifted to position or
If the automatic transmission cannot be shifted to position or the driver's display in the instrument cluster does not show anything, have the vehicle transported away More. A towing vehicle with lifting equipment is required for vehicle transportation.
The drivetrain could be damaged when towing at excessively high speeds or over long distances.
the towing eye may become detached.
the vehicle/trailer combination may swerve or even overturn.
If a vehicle must be tow-started or towed away, its weight must not exceed the permissible gross mass of the towing vehicle.
Vehicles with tow bar: you can also attach the tow bar to the trailer hitch.
the ignition is switched off.
the brake system or power steering system is malfunctioning.
the energy supply or the on-board electrical system is malfunctioning.
When your vehicle is then towed away, significantly more effort may be required to steer and brake than is normally required.
If you pull away sharply, the tractive power may be too high and the vehicles could be damaged.