Um die Webseite optimal gestalten und Ihnen an Ihre Interessen angepasste, nutzungsbasierte Informationen zukommen lassen zu können, verwendet Daimler Cookies. Mit der Nutzung der Webseite stimmen Sie der Verwendung von Cookies zu. > Weitere Informationen erhalten Sie in den Cookie-Hinweisen.

Accept
  • GLA
  • SUV
  • 03/2021
app store google play
X

Print
Attaching a roof luggage rack
WARNING Risk of accident due to exceeding the maximum roof load

The vehicle centre of gravity and the usual driving characteristics as well as the steering and braking characteristics alter.

If you exceed the maximum roof load, the driving characteristics, as well as steering and braking, will be greatly impaired.

Never exceed the maximum roof load and adjust your driving style.

You will find information on the maximum roof load in the "Technical data" section in the printed Owner's Manual.

NOTE Damage to the panorama sliding sunroof due to non-approved roof luggage racks

The panorama sliding sunroof may be damaged by the roof luggage rack if you attempt to open it when using a roof luggage rack not tested and approved for Mercedes-Benz.

When a roof luggage rack is fitted, open the panorama sliding sunroof only if this has been tested and approved for Mercedes-Benz.

The panorama sliding sunroof may be raised to allow ventilation of the vehicle interior.

Notes on driving with a roof load
  • Distribute roof load and cargo evenly and place heavy objects at the bottom. You should also observe the notes on loading the vehicle More.

  • Drive carefully, avoiding abrupt pulling away, braking and steering, as well as fast cornering.

  • When transporting roof loads and when the vehicle is fully loaded or fully occupied, select drive programs and . These are designed to focus on stability More.

Secure the roof luggage rack to the roof railing.
Observe the manufacturer's installation instructions.
Folding the rear seat backrest forwards
WARNING Risk of becoming trapped when adjusting the seats

When you adjust a seat, you may trap yourself or a vehicle occupant.

When adjusting a seat, make sure that no one has any body parts in the sweep of the seat.
WARNING Risk of accident if the rear bench seat, rear seat and seat backrest are not engaged

The rear bench seat, rear seat and seat backrest may fold forwards, even while the vehicle is in motion.

  • As a result, the vehicle occupant will be pressed into the seat belt with increased force. The seat belt will not be able to protect as intended and could cause additional injury.

  • Objects or loads in the boot or load compartment cannot be restrained by the seat backrest.

Make sure that the rear bench seat, the rear seat and the seat backrest are engaged before every trip.

If the seat backrests are not engaged and locked in place, the lock verification indicator will be red.

Always ensure that all vehicle occupants have their seat belts fastened correctly and are sitting properly. Particular attention must be paid to children.

If you no longer require the folded-down seat backrest as a loading area, fold the backrest back into place.

Requirements:
  • The area into which the seat backrest is folded is clear.

  • To fold the centre seat backrest forwards: the centre seat backrest has been unlocked.

  • The armrest on the second row of seats is folded back and the cup holders are empty.

Folding the left and right seat backrests forwards

You can fold the centre and outer seat backrests forwards.

If necessary, fully insert the seat backrest head restraints More.
Pull release lever .
Folding the centre seat backrest forwards
Pull release catch for seat backrest forwards.
Fold the corresponding seat backrest forwards.
Folding back the rear seat backrest
WARNING Risk of becoming trapped when adjusting the seats

When you adjust a seat, you may trap yourself or a vehicle occupant.

When adjusting a seat, make sure that no one has any body parts in the sweep of the seat.
WARNING Risk of accident if the rear bench seat, rear seat and seat backrest are not engaged

The rear bench seat, rear seat and seat backrest may fold forwards, even while the vehicle is in motion.

  • As a result, the vehicle occupant will be pressed into the seat belt with increased force. The seat belt will not be able to protect as intended and could cause additional injury.

  • Objects or loads in the boot or load compartment cannot be restrained by the seat backrest.

Make sure that the rear bench seat, the rear seat and the seat backrest are engaged before every trip.

If the seat backrests are not engaged and locked in place, the lock verification indicator will be red.

NOTE Damage caused by trapping the seat belt when folding back the seat backrest

The seat belt could become trapped and thus be damaged when the seat backrest is folded back.

Make sure that the seat belt is not trapped when folding back the seat backrest.
Move the driver's or front passenger seat forwards, if necessary.
Fold the corresponding seat backrest back until it engages.

Left and right seat backrests: if the seat backrest is not engaged and locked in place, the red lock verification indicator will be visible.

Centre seat backrest: if the seat backrest is not engaged and locked in place, the red lock verification indicator will be visible.

Opening or closing the stowage space under the load compartment floor
WARNING Risk of injury due to an open load compartment floor

If you drive with the load compartment floor open, objects could be flung around and hit vehicle occupants as a result. There is a risk of injury, particularly in the event of sudden braking or a sudden change in direction.

Always close the load compartment floor before a journey.
To open
Pull handle upwards.
Lift the load compartment floor up using handle .
To close
Fold the load compartment floor down and then press handle down until it engages.
Folding the ball neck out and in
WARNING Risk of accident due to the ball neck not being engaged

If the ball neck is not engaged, the trailer may come loose.

Always engage the ball neck as described.
WARNING Risk of injury from ball neck swinging outwards

The ball neck may swing outwards when unlocking or when it has not been properly engaged.

There is a risk of injury within the ball neck's range of movement!

Unlock the ball neck only when its range of movement is unobstructed.
Always be sure the ball neck is engaged when folding inwards.
NOTE Increased risk of damage to property due to folded-out ball neck
When the trailer is not coupled or the bicycle rack is attached, fold in the ball neck or, in the case of a fully electric trailer hitch, retract the ball neck.
NOTE Damage to the vehicle due to incorrect use of the trailer hitch

When a trailer hitch is used to recover a vehicle, the vehicle may be damaged in the process.

Use the trailer hitch only for pulling a trailer or attaching approved carrier systems (e.g. a bicycle rack).
Requirements:
  • The vehicle is secured against rolling away.

  • The swivel range is clear.

  • The trailer cables or adapter plugs have been removed.

Folding the ball neck out
Pull switch until the ball neck unlocks.

The ball neck will fold out from under the rear bumper.

Indicator lamp will flash.

Pull the ball neck in the direction of the arrow until it engages audibly in a vertical position.

Indicator lamp on the ball neck release switch will go out.

If the ball neck is not securely locked in place, the Trailer coupling Check lockmessage will appear on the multifunction display.

Remove the cover cap from the ball head and store it in a safe place.

Make sure that the ball on the ball neck is clean. Check that it is either greased or dry (grease-free), depending on the instructions for the trailer.

Folding the ball neck in
Pull switch until the ball neck unlocks.

The ball neck will fold up under the rear bumper.

Indicator lamp will flash.

Push the ball neck in the direction of the arrow until it engages audibly behind the bumper.

Indicator lamp will go out and the message on the multifunction display will disappear.

Observe the information about the displays on the instrument cluster:
  • Indicator and warning lamps More

  • Display messages More

Overview of the tie-down eyes

Observe the notes on loading the vehicle More.

Tie-down eyes (vehicles with through-loading feature in the rear bench seat)
Overview of the front stowage compartments
WARNING Risk of injury due to objects being stowed incorrectly

If objects in the vehicle interior are stowed incorrectly, they can slide or be thrown around and hit vehicle occupants. In addition, cup holders, open stowage spaces and mobile phone receptacles cannot always retain all objects within.

There is a risk of injury, particularly in the event of sudden braking or a sudden change in direction.

Always stow objects so that they cannot be thrown around in such situations.
Always make sure that objects do not protrude from stowage spaces, luggage nets or stowage nets.
Close the lockable stowage spaces before starting a journey.
Always stow and secure heavy, hard, pointed, sharp-edged, fragile or bulky objects in the boot/load compartment.

Observe the notes on loading the vehicle.

Stowage spaces in the doors
Stowage compartment in the armrest with a multimedia and USB connection
Stowage compartment in the front centre console with a USB port
Glove compartment