Trip distance
Trip computer From start and From reset
ECO display More
If you press and hold the left-hand Touch Control, the values of the function will be reset immediately.
You could come into contact with hot gases.
You could come into contact with other hot, escaping operating fluids.
Components in the engine compartment may continue running or start up suddenly, even if the ignition is switched off.
Make sure of the following before performing tasks in the engine compartment:
Certain components in the engine compartment may be very hot, e.g. drive system and cooler.
Windscreen washer concentrate is highly flammable.
If the windscreen wipers begin to move while you are changing the wiper blades, you can be trapped by the wiper arm.
The wiper arms will move into the replacement position.
When the colour of the maintenance display changes from black to yellow, the wiper blades should be replaced.
The duration until the colour changes varies depending on the usage conditions.
Braking efficiency is reduced after washing the vehicle.
Active Brake Assist
Active Distance Assist DISTRONIC
HOLD function
Active Parking Assist
To avoid damage to the vehicle, deactivate these systems in the following or similar situations:
Active Distance Assist DISTRONIC is deactivated.
The HOLD function is switched off.
The 360° Camera or the reversing camera is switched off.
The side windows and sliding sunroof are completely closed.
The blower for the ventilation/heating is switched off.
The windscreen wiper switch is in position .
The key is at a minimum distance of 3 m away from the vehicle. Otherwise the tailgate could open unintentionally.
In automatic car washes with conveyor systems:
Neutral is engaged.
If you would like to leave the vehicle while it is being washed, make sure the key is located in the vehicle. The park position is otherwise automatically engaged.
If, after the car wash, you remove the wax from the windscreen and wiper rubbers, this will prevent smearing and reduce wiper noise.